Maintenance Memberships & More

FURNACE

18 Point Maintenance & Safety Inspection

1. Check thermostat
2. Check and adjust safety controls
3. Clean burners
4. Change or clean filter
5. Inspect heat exchanger
6. Clean and adjust pilot assembly
7. Analyze for efficiency
8. Check temperature rise
9. Analyze output and test for carbon monoxide
10. Lubricate all moving parts
11. Check for gas/oil leaks in furnace, tank & lines
12. Turn exposed dampers to heating as required
13. Venting
14. Check manifold or oil pressure
15. Clean drains if necessary
16. Clean blower
17. Check thermocouple/cad cell/ flame sensor
18. Check for loose wires

FIREPLACE

14 Point Maintenance & Safety Inspection

1. Check and adjust thermostat
2. Check and adjust safety
3. Clean burners
4. Clean pilot
5. Inspect heat exchanger
6. Clean glass
7. Check log placement, adjust if necessary
8. Adjust burner flame
9. Check for gas leaks
10. Venting
11. Check manifold pressure
12. Clean blower/fan
13. Check thermocouple
14. Check for loose wires

AIR CONDITIONING

12 Point Maintenance & Safety Inspection

1. Check and clean condenser coil
2. Check condenser voltage & amperage
3. Check electrical connections
4. Check the safety of the unit
5. Check blower components
6. Check air filters
7. Check and clean condensate drain
8. Check thermostat
9. Check temperature drop
10. Lubricate all moving parts where required
11. Check for correct air flow
12. Check refrigerant lines for damage

MAINTENANCE & SAFETY INSPECTION FOR WATER HEATERS & BOILERS VARY FOR EACH STYLE OF UNIT